|
datasheetdetails
|
<< | < | AX-RL3R - Raise Lower to 3 relay Module
|
| |
|
The Axio AX-RL3R converts a raise to lower control signal into a 3 relay staged output. The raise and lower inputs are fully isolated from the control side of the module, in case separate ground connections are required. The module is powered by 24Vac or 24Vdc and jumpers for Auto/Hand/Off are provided to aid commissioning with individual LEDs to indicate the relay states. The AX-RL3R is supplied in a DIN rail carrier for mounting on TS35 section DIN rail and features high quality rising clamp terminals for ease of connection. |
Product Features
| • Isolated raise to lower inputs
• 3 SPCO relays
| • DIN rail carrier as standard
• High quality rising clamp terminals
|
Input signals
| 12 to 24Vac/dc or volt free raise and lower signals
| Input load
| approximately 50mA at 24Vac
| Cycle time
| 99 seconds (33 seconds per stage)
| Output contacts
| 3 SPCO relays. NO contact 12A, NC contact 3A, 250Vac resistive load
| Power supply
| 24Vac +/-10% at 140mA max, 24Vdc +/- 10%at 100mA max
| Mode of operation
| Staged output
| Manual override
| Auto/Hand (On)/Off
| LED indicators
| On when they are energised
| Terminals
| Rising clamp for 0.5-2.5mm2 cable
| Ambient temperature range
| 00C to 500C
| Dimensions 68x82x43mm
|
| Weight
| 100g
| Country of Origin
| United Kingdom
|
| AX-RL3R.pdf / Raise lower to three stage relay output module |  |
|
|
|
